The Production Principle of Cow Manure Dryer

Because the original cow manure shows solid-liquid separator, it is necessary to use the special pump without obstruction to raise the manure water and manure slag accumulated in the septic tank together and send them into the cow manure drying and wet dewatering machine, following the connection gyration of the winch blade placed inside the screen, the material is pushed to the dull plate outlet by the connection, forced by the pressure of the partition at the outlet, the material is squeezed by the connection, and the excess moisture is penetrated by the connection from the cracks of the screen, and then by the The excess dampness will be infiltrated from the cracks of the screen and discharged into the muddy water disposal pond through the drainage ballistic. Following the further increase of squeezing pressure inside the cow manure dryer, the partition plate at the outlet is forcibly opened and the dry materials are discharged thereafter, thus reaching the means of separating dry materials and manure water. The outlet is equipped with counterweight block according to the need, it uses the lever reason to contain the pressure of the outlet partition, we may arrange the pressure by arranging the place of counterweight block to reach the required drying and wetting requirements.