Horizontal fermentation tank

Horizontal fermentation tank Introduction

Horizontal fermentation tanks are constructed by:

1, Feeding system; 2, Tank fermentation system; 3, Power mixing system; 4, Discharging system; 5, Heating and heat preservation system; 6, Maintenance part; 7, Fully automatic electrical control system.

Operating Principle

Firstly, we put the material to be fermented into the fermentation tank through the belt conveyor from the feed inlet. The Main motor will be started when the material is put in, the motor reducer drives the main shaft to start mixing. At the same time, the spiral blade on the mixing shaft carries the animal material, and makes the material fully contact with the air, so that the material to be fermented can start the aerobic fermentation stage.

Secondly, the heating system of the electric heating rod at the bottom is controlled by the electric box to heat the heat transfer oil in the inter-layer of the fermenter body. The temperature of the fermenter body is controlled by the temperature sensor while heating, and the temperature of the fermenter is controlled at the fermentation station with better condition. It will be discharged through the discharge port for further processing after the fermentation of the material is completed.

Main Technical Parameters

Specification	Heating power (kW)	Power of agitator(kW)	Reducer model	stirring rate(r/min)	Dimension(mm)
15m3	30	22	ZQD850-291.19-I	3.4	6000x2600x2800
20m3	30	37	ZQD850-163.38-I	6	7400x2820x3260