A comprehensive introduction to horizontal blender

The horizontal blender is to turn the material in the barrel range under the action of the inner and outer spiral belt on the mixing shaft. The inner spiral belt pushes the material from the middle to the two sides, and the outer spiral belt pushes the material from the two sides to the center, back and forth. The mixed material moves and changes in the radial direction under the rotation of the spiral belt, thus forming a convection cycle. Due to the above-mentioned movement of stirring, the material obtains rapid and uniform mixing in a short time. The shaft seals at both ends adopt special seals. There is no leakage of powder and liquid, the replacement cost of sealing consumables is low, and the replacement is convenient. Therefore, the horizontal blender is a high-efficiency mixing equipment with wide application, strong adaptability and good effect.

The barrel of the horizontal blender is equipped with two-axis rotating and reversed blades. The blades circulate and stir the materials in the axial and radial directions at a certain angle, so that the materials are mixed quickly and evenly. The performance characteristics of horizontal blender are driven by the shaft. The rotation speed and the structure of the blade will weaken the gravity of the material. With the lack of gravity, the difference in particle size and specific gravity of each material is ignored in the mixing process. The intense stirring movement shortens the mixing time, making it faster and more efficient. Even if the material has a difference in specific gravity and particle size, it can achieve a good mixing effect under the rapid and violent tumbling of the staggered mixing blades. Horizontal blender has high mixing uniformity, low residual amount, and is suitable for mixing more than two kinds of fertilizers and additive premixes.

The horizontal blender enables the materials to be fully mixed, thereby improving the uniformity of the mixing. By using a novel rotor structure, the minimum gap between the rotor and the bright body can be adjusted to close to zero, which effectively reduces the residual amount of materials. The horizontal blender can make the material broken, the overall structure is more reasonable, the appearance is beautiful, and the operator can install and maintain it.