Maintenance of gear turning granulator

1. The bearing of the bearing crusher bears the full load of the machine, so good lubrication has a great impact on the life of the bearing. It directly affects the life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good.

2. The newly installed wheel tyres are prone to loosening and must be checked frequently.

3. Pay attention to whether the various parts of gear turning granulator are working properly.

4. Pay attention to check the degree of wear of easily worn parts, and pay attention to replacing worn parts at any time.

5. The dust and other objects on the the plane of the bottom frame should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.

6. If the bearing oil temperature rises, stop the gear turning granulator immediately and check the cause to eliminate it.

7. If there is a shock sound when the rotating gear is running, stop and check and eliminate it immediately.